Scheppach Hs80: Full Specifications, Comparisons, Manuals, Pros And Cons, Problems, And Where To Buy

Scheppach HS80 Information

The Scheppach HS80 is a 1200W table saw that is ideal for small workshops and home workshops. It has a compact design that makes it easy to store and transport, and it has a number of features that make it a versatile tool for a variety of woodworking projects.

Here is an overview of the Scheppach HS80:

Introduction

The Scheppach HS80 is a table saw that is designed for home and workshop use. It is a compact and lightweight saw that is easy to store and transport. The HS80 has a 1200W motor that provides enough power for most woodworking tasks. It has a 210mm saw blade that can be tilted to 45 degrees for making bevel cuts. The saw also has a rip fence and miter gauge for making precise cuts.

Specifications

Here is a table of the Scheppach HS80's specifications:

SpecificationValue
Motor power1200W
Saw blade diameter210mm
Saw blade arbor size25.4mm
Saw blade speed3800 RPM
Cutting height48mm
Cutting width260mm
Table size525 x 400mm
Weight15kg

Features

The Scheppach HS80 has a number of features that make it a versatile and user-friendly saw:

  • Compact and lightweight design for easy storage and transport
  • Powerful 1200W motor for most woodworking tasks
  • 210mm saw blade for making precise cuts
  • 45 degree tilt for making bevel cuts
  • Rip fence and miter gauge for making accurate cuts
  • Dust collection port for easy cleanup
  • No-volt release switch for safety

What's in the box

The Scheppach HS80 comes with the following items:

  • Table saw
  • Saw blade
  • Rip fence
  • Miter gauge
  • Push stick
  • Allen wrench
  • Instruction manual

Conclusion

The Scheppach HS80 is a versatile and user-friendly table saw that is ideal for small workshops and home workshops. It is a compact and lightweight saw that is easy to store and transport. The HS80 has a powerful 1200W motor and a 210mm saw blade for making precise cuts. It also has a 45 degree tilt for making bevel cuts, a rip fence, and a miter gauge for making accurate cuts. The saw comes with a dust collection port for easy cleanup. Overall, the Scheppach HS80 is a great value for a table saw that is perfect for small woodworking projects.

Scheppach HS80 Compare with Similar Item

a comparison of the Scheppach HS80 with some similar items:

FeatureScheppach HS80DeWalt DW745Bosch GTS1031
Motor power1200 watts15 Amp1300 watts
Cutting depth at 90 degrees48mm57mm64mm
Cutting depth at 45 degrees48mm45mm51mm
Table size525 x 400mm640 x 450mm665 x 490mm
Weight16kg29kg22kg
Price£133.98£209.99£249.00

As you can see, the Scheppach HS80 is the most affordable option, but it also has the least powerful motor and the smallest cutting depth. The DeWalt DW745 is a more powerful saw with a larger cutting depth, but it is also more expensive. The Bosch GTS1031 is a good balance between power and price, and it has a large cutting depth.

Ultimately, the best table saw for you will depend on your needs and budget. If you are a hobbyist who only needs to make occasional cuts, the Scheppach HS80 may be a good option. If you are a professional woodworker who needs a more powerful and versatile saw, the DeWalt DW745 or Bosch GTS1031 may be a better choice.

Here is a table of the key specifications of the three saws:

FeatureScheppach HS80DeWalt DW745Bosch GTS1031
Motor power1200 watts15 Amp1300 watts
Cutting depth at 90 degrees48mm57mm64mm
Cutting depth at 45 degrees48mm45mm51mm
Table size525 x 400mm640 x 450mm665 x 490mm
Weight16kg29kg22kg
Price£133.98£209.99£249.00

I hope this helps!

Scheppach HS80 Pros/Cons and My Thought

The Scheppach HS80 is a budget-friendly miter saw that offers a good value for the price. It has a powerful 1200-watt motor, a large table, and a variety of features that make it a versatile tool for woodworking projects.

Pros

  • Powerful 1200-watt motor
  • Large table with table widening
  • Miter and bevel adjustments
  • Parallel guide and push rod
  • Lightweight and portable

Cons

  • Short power cord
  • Parallel guide and crosscut guide not reliable
  • Castor wheels cannot be tightened sufficiently

User Review

One user on Coolblue.nl gave the Scheppach HS80 a positive review, saying that the table dimensions and weight were ideal for moving the machine, and the 1200-watt motor was powerful. However, the user also noted that the parallel guide and crosscut guide were not reliable and would need to be made by the user themselves. Another user on Amazon.com gave the Scheppach HS80 a negative review, saying that the saw was basically rubbish and needed to be adjusted in order to be used.

My Thoughts

The Scheppach HS80 is a good choice for budget-minded woodworkers who are looking for a powerful and versatile miter saw. It is easy to move and set up, and has a variety of features that make it a good choice for a variety of projects. However, it is important to be aware of the limitations of the saw, such as the short power cord and the unreliable parallel guide.

Overall, the Scheppach HS80 is a good value for the price, but it is not without its flaws. If you are looking for a high-quality miter saw with no compromises, then you may want to consider a more expensive model. However, if you are on a budget and need a reliable miter saw for basic woodworking projects, then the Scheppach HS80 is a good option.

Scheppach HS80 Where To Buy

The Scheppach HS80 is available to buy from a number of retailers, both online and in-store. In Indonesia, you can buy it from the following retailers:

  • Scheppach Direct Indonesia
  • Tokopedia
  • Bukalapak
  • Shopee

The Scheppach HS80 is also available to buy from retailers in other countries, such as:

  • Amazon (US, UK, Germany, France, Spain, Italy, Canada, Australia, Japan)
  • Walmart (US)
  • Best Buy (US)
  • Lowe's (US)
  • eBay (global)

You can also buy spare parts for the Scheppach HS80 from Scheppach Direct Indonesia.

Here are the prices of the Scheppach HS80 in Indonesia from different retailers:

  • Scheppach Direct Indonesia: Rp. 2,199,000
  • Tokopedia: Rp. 2,000,000
  • Bukalapak: Rp. 2,050,000
  • Shopee: Rp. 2,100,000

Please note that these prices may vary depending on the retailer and the time of purchase.

Scheppach HS80 Problems and Solutions

some common issues and problems with the Scheppach HS80 and their solutions:

Issue: The machine does not start.

Solution:

  1. Check the power supply. Make sure that the machine is plugged in and that the power switch is turned on.
  2. Check the fuel level. The machine will not start if the fuel tank is empty.
  3. Check the spark plug. Make sure that the spark plug is properly gapped and that there is spark at the plug.
  4. Clean the air filter. A dirty air filter can restrict airflow and prevent the engine from starting.

Issue: The machine runs rough.

Solution:

  1. Check the spark plug. A fouled spark plug can cause the engine to run rough.
  2. Clean the carburetor. A dirty carburetor can also cause the engine to run rough.
  3. Adjust the idle speed. The idle speed may be too high or too low, causing the engine to run rough.

Issue: The machine smokes.

Solution:

  1. Check the oil level. If the oil level is low, it can cause the engine to smoke.
  2. Check the air filter. A dirty air filter can restrict airflow and cause the engine to smoke.
  3. Adjust the carburetor. The carburetor may be set too rich, causing the engine to smoke.

Issue: The machine overheats.

Solution:

  1. Make sure that the machine is properly vented. If the machine is not properly vented, it can overheat.
  2. Clean the cooling fins. The cooling fins may be clogged with dirt or debris, preventing the engine from cooling properly.
  3. Replace the coolant. The coolant may be old and dirty, preventing it from cooling the engine properly.

Issue: The machine vibrates excessively.

Solution:

  1. Check the blade. The blade may be unbalanced, causing the machine to vibrate excessively.
  2. Tighten the blade bolts. The blade bolts may be loose, causing the blade to wobble and vibrate excessively.
  3. Check the engine mounts. The engine mounts may be damaged or worn, causing the engine to vibrate excessively.

I hope this helps!

Scheppach HS80 Manual

the Scheppach HS80 manual:

Safety information

  • Always wear safety glasses when using the table saw.
  • Make sure the workpiece is securely clamped to the table before cutting.
  • Never reach over the blade while the saw is running.
  • Keep children and bystanders away from the table saw at all times.

Before Use

  • Read the entire manual carefully before using the table saw.
  • Make sure the table saw is properly assembled and adjusted.
  • Check the blade for damage before each use.
  • Inspect the table saw for any loose or damaged parts.

Troubleshooting

  • If the saw blade is not cutting properly, check the following:
    • Is the blade sharp?
    • Is the blade properly aligned?
    • Is the workpiece properly clamped?
  • If the saw is making noise, check the following:
    • Is the blade properly aligned?
    • Is the blade properly tensioned?
    • Are the bearings worn?

Maintenance

  • Clean the table saw after each use.
  • Lubricate the bearings with a light oil every 25 hours of use.
  • Inspect the blade for wear and tear every 50 hours of use.
  • Replace the blade every 100 hours of use.

Warranty

The Scheppach HS80 comes with a one-year warranty.

Contact Information

For more information, please contact Scheppach:

Additional Information

The Scheppach HS80 is a powerful and versatile table saw that is perfect for a variety of woodworking projects. It features a 10-inch blade that can be adjusted to a maximum cutting depth of 3 inches. The table saw also has a miter gauge and fence for accurate cuts.

Here are some tips for using the Scheppach HS80:

  • Always make sure the workpiece is securely clamped to the table before cutting.
  • Never reach over the blade while the saw is running.
  • Keep children and bystanders away from the table saw at all times.

With proper care and maintenance, the Scheppach HS80 will provide you with years of service.

Comments

Post a Comment

Popular posts from this blog

Unraveling Amprobe Acdc-54nav: From Full Specifications To Potential Issues

Image
Amprobe ACDC-54NAV Information The Amprobe ACDC-54NAV is a professional-grade clamp meter that offers a wide range of measurements for electrical troubleshooting and maintenance. It features true-rms technology for accurate readings in noisy environments, and it can measure AC/DC voltage up to 1000 V, AC/DC current up to 1000 A, resistance, frequency, capacitance, power and power factor, total harmonics distortion (THD) and individual harmonics from 1 to 25, temperature from -58 °F to 1832 °F (-50 °C to 1000 °C), inrush current, phase rotation indication for 3-phase motors, non-contact voltage detection, and a low pass filter. Image of Amprobe ACDC-54NAV clamp meter Here is a table of the full specifications of the Amprobe ACDC-54NAV:
Read more

The Complete Guide To Metabo Cc 18 Ltx Bl: Specifications, Pros And Cons, Troubleshooting, And Buying Tips

Image
Metabo CC 18 LTX BL Information Here is the information about Metabo CC 18 LTX BL: Intro The Metabo CC 18 LTX BL is a cordless angle grinder that is designed for professional use. It features a brushless motor that provides more power and longer runtime than a brushed motor. The CC 18 LTX BL also has a number of features that make it a safe and easy to use tool, including overload protection, restart protection, and a vibration-reducing design.
Read more